HiIn DNAC we can only define a single AP pool. Either the AP is auto assigned to that pool by a macro on the AP or we manually assign a port to the AP pool in the port assignment area. However, this only allows for one pool.We have a scenario where...
Hi all,I installed application policy so I could configure QOS within DNAC. All was complete and the app policy section was showing but after leaving for an hour and coming back to it I can no longer see it as an option and cannot amend my config..Wh...
Do all VNs from a SDA border node need to the same fusion device? We would like to take our Corporate traffic and fuse that to our GRT with a Nexus switch. We'd like to take our IOT and Guest VNs and run them through a firewall for policy and inspe...
We have SDA which includes DNAC servers plus ISE integration The license is DNA premier which includes ISE license What will happen if the DNA license expires ? Is this will affect the DNAC GUI as to manage devices, configure policies, or access anal...
Is there a command to view the size and capacity of the Transit Control Plane node database? Is there a way to see the number of prefixes in the database and what the max capacity is for the device in question? Maybe it's a non-issue but wanted to ...
Dear all,I have a reoccurring issue, where commands I manually remove from SDA devices keep showing up.I want to disable "snmp-trap enable traps syslog" on the devices. The first time I tried to do this via applying a template through network profile...
Hi All,Quick question hopefully. I noticed that when DNA Center provisions a L2 network within a fabric site, its allocates a L2VNID starting 8188 for local segments and 16196 for multisite remote border/anchor VN segments.If I remove and re-add an p...
Hi Everyone, I'm currently in middle of a rollout of Cisco SDA across our estate incorporating Cisco DNA Center, ISE, ACI etc. Its going well :). Most of my sites are either private fiber or leased circuits which have been migrated to Cisco without a...
Hi , Thank you so much . Does anyone have any idea how to onboard the stackwise virtual into fabric , as of today LAN automation is not supported.Im thinking of below approach , really appreciate your valuable suggestions. 1> Manually configure the...
Hi All,I operate a small number of SDA fabrics that all use the Deny-List (default Allow) Group-Based Access Control/TrustSec Model. I am not considering changing these to use the Allow-List (default Deny) model, however I'm aware that if the Default...
Hey all, I'm trying to provision a fabric device as a border node, and I get the following error: Failed to add device SW400-1.adamlab.local to the Fabric Site/Zone since 'ip routing' is not configured on the device. Please configure ip routing on th...
Hi All,I'm currently deploying a multi-site SDA fabric and I wanted to find out how others are managing the VLAN IDs that are assigned to IP address pools.When testing, DNA Center auto allocates VLAN IDs to IP Pools starting from VLAN 1021, however t...
Hi!We have built a SDA network but discovered that the access switches no longer send switch/port to the DHCP-servers.In our old network we used "ip dhcp snooping information option format remote-id hostname" on the access switches to be able to inse...
HII see in our DNAc that in Inventory we can add FMC devices now, Can anyone tell me if I can still add them when the FMC is not part of the SD Access, and if so when added what am I able to do to the FMC once added , also is it no disruptive adding...
HiIs it possible to hand off the same L2 VN on multiple borders ? I know it's not recommended to use the Border/CP for this function but I'm just exploring possibilities here. So, for example, I have 2 Borders (either L2 only or Border/CP nodes). ...
