Could someone confirm what the current minimum quantity of CUWL-PRO licences needed for a new order. The reason for the question is that all documentation mentions a minimum of 50. However, DCT allows you to configure a minimum of 20.ThanksNorman
I am working on getting CUC clusters in different data centers.I have few questions which I dont have a setup to perform in test lab1. If we configure 250 ports on each server, CUC SRND says we need 35Mbps of bandwidh..When this bandwidth is used ???...
Good Day All,I am having troubles getting prompt files converted and uploaded correctly to the UCCX server.I was reading the manual and it said that the file format for G.711 should be the following attributes.8.000kHz, 8 Bit, Mono 7 kb/sec..I always...
Hi All,When i checked on the subscriber mailbox profile, i can see a fews of them is having the e.164 (+XXXXX...) as their fax id,but when i try to configured a different subscriber profile by entered the "+" manually, the system prompted it's an inv...
Hi guys,i am experiencing a very annoying issue...with CIPC 8.6.1 installed on a Vista system, everything works fine except that after pressing the speaker button the app freezes! any of you had the same issue? Is that something that i should try to ...
Hello,I was considering turning up IOS Conf bridge resources on remote voice gateways since I have a lot of spare DSP resources. Transcoding resources are configured at the sites where the CUCM PUB and SUB reside but are not really needed because the...
HelloI need to install the cisco presence client in a terminal services environment.I am pretty sure you can but I need to locate the installation guide for that and also need to understand the limitations of the client in terminal services mode.I am...
Hi Guy's,Have had an issue where our "Connection Mailbox Sync" service keeps stopping for no apparent reason and we have to manually start the service... Sometimes this will start immediately and some not....Any thoughts what this is due to??? Curren...
Hi All.I need a script for cisco contact center express if you have place share with me. Please help if you have script like below;When call comes to script (with welcome promt)pres 2 for sales (if pres 2 ı will forward that call forexample ext 20...
Hi everyoneI wanted to know if someone can help me with this issue that I'm having. I have a new intallation of CUCM in our NY office as a SUB, but when you input a phone it's registering back to your Georgia Subcriber instead of the one in NY.Wh...
Hi,I'm testing IP Phone SDK7.1.2 Push2Phone with CUCM8.6 but get HTTP 404 error.-update the push2phone.asp initial variable such as CUCM IP address and credentials but nothing change other asp files-the wireshark steps captured on IIS server side1) H...
As per UCS based guidelines, 10,000 users can be supported per VM (on B series blade server's)We need to integrate additional 4 Contact center's based on UCCX with same system's.How much this capacity of 10,000 users will bet reduced due to additiona...
I'm considering BE3000 for a customer. I've never worked with it, so I'm trying to research its features as compared to CUCM.I've read throught the Admin and User guides and found a few videos on YouTube; however, I still have some questions.Are ther...
Folks,I have a customer looking to swap the DRAM included in the UCS-C210M2-VCD2 bundle from this:Included: UC-N01-M304GB1 4GB DDR3-1333MHz RDIMM/PC3-10600/dual rank 1Gb DRAMs to an 8GB version in order to cut down on the number of DRAm slots ta...
