Hi All I have a CUCM 11.5 and Cups 11.5 and the changes made on CUCM does not replicate to the CUP, but if i restart the dir sync service on cup the changes are replicated. On system dasboard apears "Sync Completed, but currently failed to connec...
Hi All I have a CUCM 11.5 and Cups 11.5 and the changes made on CUCM does not replicate to the CUP, but if i restart the dir sync service on cup the changes are replicated. On system dasboard apears "Sync Completed, but currently failed to connec...
Dear Cisco community, we are using the Single Inbox (SIB) feature without ViewMail in order to receive voicemails as .wav emails. Why would I configure a relay address under the User page --> Message Actions menu, if I have already configured SIB t...
Hi all, I have an outgoing calls issue. Here we go, I have two CUCM installed (4.3 and 11.5) and a trunk working fine between them, the old one is going to be replace by the 11.5 but the infrastructure will use the same gateway with BRI interface....
I've replaced the receptionist phone and now the Attendant console is not showing the line status or incoming calls. I've updated the application user to make sure that it controls the phone. Any other places that I need to update?
I needed to reinstall a Unity Connection 8.5 server (server crash due to power failure).After the reinstallation and reconfiguration of the CUC, the same does not synchronize and / or import users from CUCM (version 8.5).The CUCM is integrated with L...
My customer is currently running CUCM 9.1 and using Expressway for Jabber MRA version 8.2.2. We are planning to upgrade CUCM to 11.5 so understand that Expressway will need upgrading. I'm trying to find some documentation that states what Expressway...
Hello All,We have setup Whisper call feature from the script using Place Call step to make the call to agent for a short description about the call and then it will connect to the customer to the Agent. Now everything works fine, but some time the CA...
Hi All, I ma preparing for the CCNP Voice certifications and wondered, if there is a way to obtain a demo or evaluation version of the CUCM software. I would like to build a small lab with CUCM 11 or 12 and have a good hands-on practice. Apprecia...
Hi All,We have recently transitioned to SIP with AT&T. One issue we have ran into is that our Call Center Agents have a NON-DID extension for Agent that is masked with our 800 number. On SIP it appears AT&T is policing the numbers for Toll Free Cal...
I'm using the Cisco TSP x64 driver. It worked without any problems on Windows 8.1After upgrading my machine to Windows 10 Enterprise it doesn't work any more. It seems that the behavior for loading the configuration data changed in Win10:If I access ...
Hello Guys, I have just upgraded jabber guest to the latest version 11.1.x . I understand that this version has the option for guest users to customize their name. During my testing, i have just checked the option of ''allowing users to customize the...
Hi All,We have a multisite architecture with centralised call processing and Unity Connection 8.x is also shared by all the sites.Only in 1 particular site, we are unable to hear the personal greeting recorded by the users, it play the system default...
I get a parser error when I log into 11. 5 call manager CLI/OS subscriber. Do not get these errors on the publisher or other subscribers. /usr/local/platform/conf/platformConfig.xml:78: parser error : xmlParseCharRef: invalid xmlChar value 2367982e...
Hi guys. Is it right/correct to generate PLM request to get permanent license and install it if CUCM has demo licenses ? I am not sure if it will cause some inconsistency with permanent , because of system had demo licenses...
I have a customer who has been experiencing an issue with a hunt group their operator phone (which is a 7962) was placed in. The line group contains the operator's DN, followed by two other DNs. The call is supposed to go to the operator first, and ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-18-2024 04:56 PM | ||
04-17-2024 01:06 PM | ||
04-11-2024 03:24 PM | ||
04-09-2024 09:23 AM | ||
04-02-2024 03:27 AM |
User | Count |
---|---|
6 | |
3 | |
3 | |
1 | |
1 |