Hello,
We are observing a change in behavior of the mls qos on the 2960 switch series between IOS 15.2.(4)E6 and 15.2.(7)E5.
The applied configuration is as follows:
mls qos map cos-dscp 0 0 0 0 0 0 0 0
mls qos map dscp-cos 0 1 2 3 4 5 6 7 to 0mls qo...
Hello,
On the Catalyst 9200 series, particularly the 9200CX and 9200L models, when the boot value is not defined, the equipment starts in Rommon mode.
When the boot value is defined with a specified *.bin file, it starts correctly with the defined...
Bonjour,
Qu'est ce qui permet de faire x2,5 en capacité de traitement entre le C8500-20X6C et le C8500-12X4QC alors qu'ils utilisent le même type de QFP ?
Merci,
Cordialement
Antoine C.
Certainly, on previous models, the equipment would select the first valid IOS when nothing was defined.
However, during our tests, we observed that this behavior is no longer identical on the C9200.
That's why I'm trying to find out if there is a ...
Yes, it is indeed an alternative technique. I am rather seeking an "autoselection" mode of the IOS present in the flash, without defining any parameters of the boot mode or the installation mode.
