About IWSup

IWSup · 03-27-2024

I have recently taken over a site that utilizes a Cisco Router to act as their public facing device/firewall. I have been tasked with setting up a IKEv2 S2S tunnel with one of our external vendors, and it will need to be setup on this router.I have w...

IWSup · 03-28-2024

Quick update, I was able to get the tunnel applied without brining down the site with the above information. Really appreciate all the help. However, the tunnel is showing DOWN, and I was just informed I will need to implement a NAT on our side of th...

IWSup · 03-27-2024

@Rob Ingram Appreciate the information. I am currently waiting to hear back from my external vendor on their Internal IP and if NAT will end up being needed, so I can get the ACLs properly setup. Planning to make the changes in the morning once I get...

IWSup · 03-27-2024

@Rob IngramThanks for the information, that makes sense. So the IP access list should only define the LAN to LAN traffic from each side of the VPN tunnel? ip access-list extended 101 permit ip LocalLAN Subnet RemoteLAN Subnet Regarding the Firewall_...

IWSup · 03-27-2024

I did not have the chance to ping LAN to LAN. I work remote, and applying the Crypto Map to the interface dropped my connection to the environment. Calling the site, I found internet access to the entire environment went down.I ended up having an on ...

Member Since	‎03-27-2024 09:43 AM
Date Last Visited	‎04-03-2024 12:05 AM
Posts	5
Total Helpful Votes Received	1

User Statistics

User Activity

Cisco Router C891F IKEv2 Site-to-Site Setup

Re: Cisco Router C891F IKEv2 Site-to-Site Setup

Re: Cisco Router C891F IKEv2 Site-to-Site Setup

Re: Cisco Router C891F IKEv2 Site-to-Site Setup

Re: Cisco Router C891F IKEv2 Site-to-Site Setup