Hi everyoneI have two question about cisco ACI leaf switches.1- is it possible convert uplinks to downlinks on Nexus 93240YC-FX2 in cisco ACI ? 2- all switches in leaf layer must be in same model? can i use multiple models in leaf layer?Many thanks
Hi everyoneI have some cisco Aironet 2800. i joined this access point to vWLC version 8.10.130. but after while they disconnected from wlc randomly. in first i check network connection between AP and WLC everything is ok, while access point disconnec...
Hi
I have a problem with integration NAM-2 service module and Prime Infra,
i add NAM-3 in Prime with HTTP and SNMP , but NAM-3 not show as Data Source, i also add Prime Infra in NAM-3 ,
anybody know cause of these problem?
Many Thanks
Hi @anpetit Thank you for your direct answer, based on your answer we can use QSFP-40/100G-SRBD on 8 uplink ports on switch N9K-93600CD-GX.Is there any documentation available that demonstrates the compatibility of using that transceiver on uplink po...
Hi @anpetit actually, I`v checked it, the problem is that switch support QSFP-DD on uplinks, but my spine switches don`t have 400G port (N9K-C9364C-GX), i want to know that is it possible use QSFP-40/100-SRBD on uplinks port or use down links as upli...
Hiif you have deployed it with Data-Store Domain, you can`t use the Desktop Client. the Desktop client will be available only in non-datastore domains.Thanks
HiNot a cause for concern. This is a simple process but i recommended to you use this procedure to upgrade WLC:1- before copy firmware file to WLC provide backup of your configuration2- after copy firmware file to the wlc, pre-download firmware to Ac...
Hi Guys Finally i can find problem, the core switch of my customer have problem with ARP table and lost ARP entries, This issue caused Keep-alive drop and capwap restarted. for temporary, I configure IP SLA on core switch to ping controller and acce...