Hi FreindsI Heard that u can Integrate ACI Simulator with vmware VCA using Mgmt Tenanant using the the Mgmt IPs for both ! so that you can push PG to VC and Play Around , any walk around Thanks
The content you are looking for has been archived. View related content below.
Hi FreindsI Heard that u can Integrate ACI Simulator with vmware VCA using Mgmt Tenanant using the the Mgmt IPs for both ! so that you can push PG to VC and Play Around , any walk around Thanks
Hi All, I need your assistance to check if the following configuration going to work and are there any drawbacks/caveats?So far I identified OSPF convergence time and impact on a relatively large area 0 *(legacy design). Solution details:I have ACI M...
Hi All,I'm currently deploying ACI Multipod with two pods.I've configured a single VRF and single BGP L3Out that connects the leaf switches within each pod to our core network. This L3Out is then assigned to each BD which results in the the associate...
Hi All,I'm currently designing an ACI solution for a single customer that wants to use multiple tenants for different business functions (prod, dmz, dev etc) whilst using the same physical infrastructure. For ACI, I typically configure separate VLAN ...
Hello everyone,I'm reaching out to the Cisco community for assistance with a problem I'm encountering regarding the assignment of a Provided Contract to vzANY in Cisco ACI. I've tried various solutions but so far haven't been able to resolve this iss...
Hello when a BD subnet is advertised over an OSPF L3out, i'm seeing tha subnet as E2 external route with metric 20 on the router connectd to BL (VPC link). Why the subnet is shown as external and not internal OSPF route? Why the metric is 20 ? Regard...
Hi Guys, I am looking for some help as I hit obstacles and I think that I have tried all possible options, to get this issue resolved.So I was converting Nexus 9332C from NX-OS mode to ACI mode to version aci-n9000-dk9.14.2.6o.bin and at some point p...
Hi All,I am geting below alert while configuring ELAM on ACI leaf switch.Can any one suggest on this.module-1# debug platform internal tah elam asic 0Invalid CLI for platform type - TAHalso can some one share the procedure to perform the ELAM capture...
Hi All,We have 300+ EPGs in our Environment and some of them are not used.Is there a Moquery to list all the unused EPGs?
We are currently investigating how we can connect our cisco ACI to IPN for multi-pod connectivity. Currently the we are planning to implement Single Mode Fibre across our datacentres. We would be using catalyst switches for our IPN devices. Our under...
Hi all, I have a question concerning a use case in our prod network. We need to configure inter-communication EPG between two site via MSO , in this case i have two options : -First is to use a stretched VRF between sites and apply a stretched cont...
Hello,How can I resolve this fault F0849 please? I didn't find the affected object on the GUI!Thank you;
Hi experts. I'm struggling with the abysmal user interface experience introduced in ACI v5.1 for upgrading switch firmware. Having managed to blunder through an upgrade about a year ago using the new UI, I am now at the stage where I have my two upgr...
Hi, we have a Cisco ACI in our LAB enviroment with an older version 2.2. We'd like reset/clean all the fabric (n.3 APIC,n.2 Leaf and n.2 Spine) and restart with a new version, the 5.2. Our hardware support it We don't need the backup of actual config...
Hi board and ACI experts,quick question regarding SNMP traps in ACI:What's the purpose of the SNMP Trap Forward Servers in the Fabric Pod Policies?uni/fabric/snmppol-{POLICY-NAME}/snmpTrapFwdServerPIf I understood the whole thing correctly, the corre...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-22-2024 03:41 AM | ||
04-17-2024 06:22 AM | ||
04-04-2024 03:57 AM | ||
04-04-2024 02:29 AM | ||
04-01-2024 05:29 AM |