I have no experience with nexus or fabric extender equipmentmy company wants to make a port channel between the fabric and the nas server. could you please guide me with the configuration for the port channel?
I have no experience with nexus or fabric extender equipmentmy company wants to make a port channel between the fabric and the nas server. could you please guide me with the configuration for the port channel?
Hi,There is a command "show tcp statistics" to get tcp statistics.whether this tcp statistics are of VSM or it includes tcp statistics of VSM+VMs on ESX.Thanks,D V
Dear community,If we have a servers behind a dc firewall as shown in the topology attached, how do we stretch vlans over the dc and dr site yet there are layer 3 devices in between? Yours thankfully,Isaac.
HI, I deleted a zone that was never brought up to the activation pane. I then checked to see if the zone was deleted, and all zones disappeared for that VSAN. I cancelled out of it, check and the zones are still there. When I went into the vsan to ed...
I think there is some error on the next document:https://www.cisco.com/c/en/us/td/docs/dcn/nx-os/nexus9000/103x/upgrade/cisco-nexus-9000-nx-os-software-upgrade-downgrade-guide-103x/m_converting_from_cisco_nx-os_to_aci_mode_10x.htmlI tried the procedu...
hello I would like to check if the topology of the images is supported.having a pair of FEX in dual home and another pair of FEX in single home connected to the same parent switches. Parent switches are nexus 9000. Separately, both topologies are sup...
I complete full course and passed exam with 80% marks but didn’t get any certification or badge . Provide me my certificate of completion. #help @cisco @skillforall
This documentation seems wrong, and doesn't work. Am I missing something or does the documentation need to be fixed.Talking about :Configuration Centralized VRF Route-Leaking - Shared Internet with Custom VRFhttps://www.cisco.com/c/en/us/td/docs/swit...
Hello colleagues! There is a question in terms of Data center design. My current customer would like to save a money (often case, right?) and interested in using only 4 nodes in minimal configuration instead of 6. Initially I suggested 2 spines, 2 le...
I am going to replace fabric modules model N9K-C9508-FM-E with model N9K-C9508-FM-E2, with the C9508 ACI-Mode device turned on. Is there no problem if I make this replacement with the device turned on?
What features does Nexus N9K-C93108TC-FX3 support if it's ordered without any license in NX-OS mode?
I have two 93180YC-EX switch configured as vpc . running as leaf switch connect to spine swtich I found weird problem I can find 1535 host routes on two leaf switches, but one leaf1 we can find most host routes put into host trie route Total number ...
Hello as per the below topology. I have two questions.1) When S1 sends the broadcast traffic for S2, through which link the broadcast will go?2) Also, when the broadcast reaches S2 it can send the same broadcast back to S1 as both the servers are co...
Nexus 93180YC-FX3 switches contain an "GNSS" LED at their front * which is not part of the documentation (hardware installation guide for example) Since "feature frequency-synchronization" has to be licensed (DCN SyncE Add-On License)* GNSS seems t...
Hi,I'm come up against this bug, or maybe it's not really a bug since there was apparently no intention to change the behaviour ..."When a N9K VPC primary switch comes up after reload , the peer-link on Secondary VPC goes into ALT BLK state for the a...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 02:35 PM | ||
04-25-2024 12:14 PM | ||
04-25-2024 11:29 AM | ||
04-24-2024 10:01 PM | ||
04-16-2024 04:52 AM |