Hi
I am designing a new network, that will consist of switchs 3850 ( stack) as CE connecting to PE where MPLS is running , prime server will be used to manage the network
I am thinking on the way to separate user and Management traffic, from CE I ll...
Hello,
i got the following message when i enter this command: neighbor VPNv4 activate under address-family vpnv4
% Activation failed : configure "bgp listener range" before activating peergroup os SR 920
this is configuration
router bgp 65500
ne...
Hello,
I made LAB using CSR1000V as PE and 3750 as CE , i configured RIP CE/PE, routing between them is working well, however redistribution is not working
PE configuration :
vrf definition vpn1 rd 100:1 ! address-family ipv4 route-target exp...
Hello,
I have connected my Switch campus C3850 to my VDC-COR (Nexus 7710) L3 , the isssue that i have from my VDC-COR i can ping my SVI that are located in my SW-campus, however others address that are located on mt campus not joinable this an exa...
Hello,We have a customer that want to use one of VDC Nexus 7K as the edge to replace his 7200 RTRis it good idea, or is it better to buy ASRwhat is the advatange iof using ASR instead of Nexus in the EdgeThanks
Hello,
find in the atteched file the toplogy
also i created a loobpack 0 on SW-campus for test only, I was able to ping it from my COR
SW-COR-1# ping 10.99.155.1PING 10.99.155.1 (10.99.155.1): 56 data bytes64 bytes from 10.99.155.1: icmp_seq=0...
Hello Philip,
Thanks for your feedback,
as we have another catalyst switch 6509, we want to creat VSS between them, this is why we are looking for best solution ethier to pruchase another one or if it possible to upgarde from catos to IOS, below t...
HI,
Below the result of show version command
WS-C6506 Software, Version NmpSW: 8.1(3)
System Bootstrap Version: 7.1(1)System Boot Image File is 'bootflash:cat6000-sup2k9.8-1-3.bin'System Configuration register is 0x2102
Hardware Version: 3.0 Model ...