When FI-A and FI-B is active, we are able to access the FI cluster GUI. When FI-A, failed we are not able to access the FI-cluster GUI.
It is normal or do we missing any configuration for failover.
Hi, all,
i have configured Service Profile Template, but i can not assign it on blade server because of following error
There are not enough resources overallMAC address assignment failed for a vNIC, possibly illegal MAC address or no available MACs ...
Here's an odd one for you!
I deployed UCS Central Appliance, v 1.3(1c), and performed various bits of configuration last week. I've gone to log in today and am unable to login to the standard interface, https://ucsc-01/#. I get a spinning cog that ev...
in UCS server, we are using one blade for DMZ zone. Customer requesting to give one dedicated uplink port for DMZ-server in FI.
Please advice the best practice for DMZ blade vnic and uplink configuration on FI side.
Hi, we have one connection with a switch 5548 and a 6200 UCS with two ports in port channel.These ports are 8g but not figure how 16g to NPIV and NPV, like show the picture. we will be thank for any answer.Thanks
B200-M4, UCS 2.2.6e.
Host Firmware Package 2.2.6e
Autoinstall server 2.2.6e
Board Controller running version 10.0, startup version 5.0
Why is startup version not properly updated ?
see g1 and g2 attachments
Hi folks,
Cisco Nexus 2348UPQ has 24-10Gb uplink interfaces. Supposedly that on distribution layer we have a pair of Cisco Nexus 5548UP, how many ports can we bundle on 2348 for the vPC links for dual-homing.
Many thanks!!!
Hi,
We have 3 units of C240 M4SX with CNA VIC 1225 attached to Fabric Interconnect (FI).
I understand that in order for the FI to discover the UCS server it need to be connected to LOM or VIC.
In my case, when I connect to FI via VIC, the server is ...
Hi Everyone,
The support forums have been a great help wanted to thank everyone for their input. I'm upgrading to 2.2(6) from 2.2(3d) and during the auto install I'm getting stuck at 65% on my Fabric Interconnect. I Tried to force it with manually b...
Dear expert,
I have installed UCSC-RAID-MZ-240= RAID into ucs-c-240M3 server.I have disabled embedded RAID card from bios. During installation of wind2k12 server I can't find driver for RAID card.I have tried several driver but it is not working.
I...
Sooooooo, I believe I am at least part-way to having this configured properly. I've zoned, assigned storage, configured boot from san on the UCS.
I installed vmware by mounting the CD image, booting from that, installing from my SAN LUN. Did a touch...
The FI 6332 has 26 QSFP+ Ports and 6 QSFP+ Modul Ports. The former can be broken out using QSFP-SFP break-out cable. According to the documentation, this results in 98 10G ports, which is odd, because 26 * 4 is 104 and 26 is a unusual number anyway. ...
