About Andreas Wildenauer

Andreas Wildenauer · 04-16-2024

When i discover a new switch with LAN-automation other switches, which are not directly connected to the specified interface are going into a queued status. Which means:Queued: The device is queued for later processing because it isn’t directly conne...

Andreas Wildenauer · 07-14-2023

I have a SDA Fabric, running version 2.3.5.3 and want to include some older C3850 (version 16.12.09) to the fabric. Regarding the SDA-Comp. table it should be possible as Fabric-Edge devices. For me it doesn't makes a difference if the switch gets ad...

Andreas Wildenauer · 07-19-2017

I have 2 Nexus 7710 with NX-OS 8 which have a routed VPC Peerlink in between. To this two devices there is a Cisco 3850 connected. Following config is used: Nexus-switch1 & 2 # interface Ethernet1/7 description testswitch switchport switchport mode ...

Andreas Wildenauer · 09-27-2013

Hi,i have a problem with 3750X-POE, when the Power is to low i want to add a second Powersupply. Sometimes it doesn't get's recognized, I can see in the Log-file that power supply was inserted and power is good but a show inventory doesn't show the s...

Andreas Wildenauer · 04-23-2013

Due to a problem with POE+ i have tried to upgrade the IOS to Version15.0.2SE2, from 12.2.58. unfortunatly the Switch doesn't boot up anymore. It starts to decompress and install the IOS 2 Times, after the Second try it displays "unable to boot" and...

Andreas Wildenauer · 04-17-2024

Thanks for the answer, so i should select all new/active interfaces right at the first run of LAN-automation rather than discover one-by-one?! And, yes, i was talking about switches connected to the same seed-device.

Andreas Wildenauer · 07-16-2023

@jedolphi Thanks for the link, i understand that the 3850 is out of sale but for my scenario it's the best choice. I need some "dumb" switches to connect some iOT devices to my network. IEs doesn't give me the port densitiy i need and 9K switches are...

Andreas Wildenauer · 07-14-2023

This is a productive environment with around 70 Edge-nodes.. So i can't change the general backbone routing of the Fabric. I am trying to just add some older 3850 for iOT devices..

Andreas Wildenauer · 07-14-2023

Hi Flavio, Lisp Pub/Sub is used in my deployment, yes. Unfortunatly the newest version for 3850 is the 16.12.9, so can't upgrade to a 17.x version. Is there a way to not use Lisp Pub/Sub for specfic edge nodes?

Andreas Wildenauer · 07-14-2023

This is actually 16.12.9. I dont' know why the version is calles 16.12.9 but the file is called 16.12.09:

Member Since	‎01-03-2013 02:25 AM
Date Last Visited	‎04-17-2024 12:04 AM
Posts	21

User Statistics

User Activity

Lan Automation: What to do with "queued" devices

How-to add Catalyst 3850 to Fabric

Nexus 7700 no connections of some hosts in different vlans over vpc connected switch

3750X-POE doesn't recognize 2nd power supply

3750x doesn't boot after upgrade to version15

Re: Lan Automation: What to do with "queued" devices

Re: How-to add Catalyst 3850 to Fabric

Re: How-to add Catalyst 3850 to Fabric

Re: How-to add Catalyst 3850 to Fabric

Re: How-to add Catalyst 3850 to Fabric