Wireless

Hi folks.   Does anyone know what is CSMA/CA thresholds for Cisco APs. By that I mean how low should be a received dBm for one station to ignore the signal from another station on the same channel to avoid same channel competition? I'm interested is ...

Hello, We have a WLC, central, with flexconnect and capwap, we have 12 3802E/I APs and 30 Zebra Scanners MC92N0.   Since 6 months we have been facing some weird issues with the scanners, they kept de-associate and re-associate in random AP, let them ...

Hello All, I am trying to get a Cisco AIR-AP1852I-E-K9 to work on a Cicso WLC 2504 (software version 8.0.133.0). The WLC can see the Access Point which gets the correct IP, but it has been stack at Operational Status: Downloading for the past 24 hour...

Hello Team,   I have upgraded CMX from 10.1 to 10.4 but the Cassandra module is running with old version 2.0.9. Even though new Cassandra 2.1.13 is installed as seen in the outputs. I have attached some screen shoot for the reference. Please check an...

Hello Everyone,   I have a single 3802i with Mobility Express 8.5.131.0 running and whenever I set the 5ghz channel to 160mhz the cleanair status for that radio goes to admin enabled but status down. I've tried this on 8.7 with the same problem. Clea...

Hi Guys,   Based on your experience, should I turn on SSH on access points that run on LWAP mode? Or SSH access only to the WLC is enough? What are the pros and cons if I turn on the SSH on those access point?   Thank you.

Hi,   On Cisco Prime it is possible to create custom alarm plocies and our customer has requested that one be created for channel utilisation per AP.    Therefore, when creating the policy and selecting the signal to noise ration threshold limit to t...

Can we send the Cisco prime infrastructure local logs to external syslog server ? What I am trying to ask is if a user try to login to the Cisco prime and he is not able to login and we want to send that failed login attempts in the Cisco prime to an...

What is the best way to verify the antennas have been aligned correctly?  Another post recommended reading the RSSI value, but I'm not sure where this is found on a 1532?  The AP's are connected to a controller and reachable on SSH. 

Looking to implement temporary GuestWireless Design prior to while the ISE deployment is in procress. Went with NextGen networking for WLC 552 and AP 3800. Since the WLC dos not support DHCP does anyone have any suggestions for GuestNetwork design. W...

Trying to setup a wireless bridge between 2 1542 and a 3504. I have the 1542 joined to the controller and under the wireless tab set in bride mode but on APSub Mode i can not select a different function. Under AAA/mac filtering they are added in ther...