The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Hello all, we are currently transitioning to a virtual 9800-CL WLC, hosted on a VMWare node on premise. The WLC and the FlexConnect APs are working correctly but I am experiencing a weird behavior with the interfaces. The APs are on VLAN 1 - 192.168...
Good morning,Thank you in advance for your help.We have a room where we have installed a Cisco SX20 videoconferencing system with a Cisco Touch 10. The problem we are encountering is that when we are in a meeting, an external tries to share screen an...
Hi Guys, i had this problem for 8 hours now and can't seem to get it cracked... after i input the command copy xmodem: flash:c2960-lanbasek9-mz.152-7.e9.binand using the SecureCRT going to Transfer > send xmodem I get this and after that nothing happ...
Hi all, is there any restriction when I integrate Firepower 8350 with FMCv300 AWS Machine Image? the FMCv300 firmware version is 7.4.1-172, but the Firepower firmware version is 6.x. Additionally, If I wanna configure HA between FMCv300, is it possib...
Team,On this Te0/0/0.667 subinterface we have more than 200 users. so we set the PPPOE maximum session.After setting up PPPOE maximum session to 1000 , IPTV not connecting automatically and getting option SKIP or RETRY. after select skip IPTV getting...
Hello. I have a problem. When I start or join the meeting as a host or co-host there is no menu top bar. It used to be hided so I could show it. Now there is no menu bar. On the top of meeting window there is only meeting subject and meeting informat...
hello We have a old fire power that I have no idea how to upgrade. The actual device is a Cisco Firepower 2130 Threat Defense (77) Version 7.0.4 . Cisco Adaptive Security Appliance Software Version 9.16(3)18. and we have a FMC that is Cisco Firepower...
The current version of my Cisco Firewall is SSH-2.0-OpenSSH_7.5. Following the recommendation from our security team, I would like to upgrade it to version 8.8 or a later version. Can you please guide me on how to perform the upgrade?
My router not getting IP Address after reload. Interface IP-Address OK? Method Status ProtocolGigabitEthernet0/0/0 192.168.231.9 YES NVRAM up up---GigabitEthernet0/0/1 unassigned YES DHCP up up--- Gig 0/0/1 Connected to ISP Router, since we not gett...
the seller at the bazaar can't tell me the license type, he can't. he claims that I can find out the license type myself using the serial number, is that true?